CNC Milling & Labelling
This service is suitable for hot-stamped clay chips only.
Prices as of January 1, 2025 and remain unchanged through 2026
Paulson or ASM/CPC chips
circular milling & labels ... $2.25 USD per chip
shaped milling & labels ... $3.00 or $3.50 USD per chip (depends on the hotstamp and shape desired)
TRK chips
circular milling & labels ... $2.75 USD per chip
shaped milling & labels ... $4.00 USD per chip
This service Includes:
milling both sides of the chip
cleanup & final surface prep
new laminated labels
application of the labels
These are the classic shaped inlay shapes. But don't feel you have to limit yourself to these.
Puget Sound Poker - We shape milled the $1's and $5's (and inlay replaced the $25's and $100's) to make this customer's custom set.
Our customer sent us these; ( older Paulson hotstamped chips)
And we turned them into THIS... We milled out the hot stamps, printed the customer's artwork and applied the custom labels to the custom milled chips.
Before and After - Shaped milling to remove the hot stamp (pictured on top) and add a label (pictured on the bottom).
To quote our customer: "New (and improved) Aztar Missouri $5 chips to replace the original worn giant inlay version. (originally Aurora Star T5 chips)"
Fully custom shape milled set. We took someone's old hotstamped solid Paulson chips and made their dream set, milling the shapes of the 25¢, $5.00 and $25.00
TRK's milled circular and labels added.
We milled the red chip, a fantastic looking sawtooth shape. Note the tip of the sawtooth is not sharp, but a little rounded. This is a practical demonstration of the "sharp inside corner" rule of milling shapes. See FAQ below.
Good Old Circles